Boating New Zealand Boat Reviews
Reviews
Boating New Zealand News
News
Boating New Zealand Sports
Sport
Boating New Zealand Lifestyle
Lifestyle
advertise
Boating New Zealand Boat Reviews
Reviews
Boating New Zealand News
News
Boating New Zealand Sports
Sport
Boating New Zealand Lifestyle
Lifestyle
BOAT-REVIEWS-MOBILE
Boat Reviews
BOAT-NEWS-MOBILE
News
BOAT-SPORTS-MOBILE
Sports
BOAT-LIFESTYLE-MOBILE
Lifestyle
HomeBoatBoat MaintenanceSmooth cruising starts ashore, Maritimo’s guide to smart motor yacht upkeep

Smooth cruising starts ashore, Maritimo’s guide to smart motor yacht upkeep

Published

Whether you own a Maritimo or another high-performance cruiser, regular maintenance is the key to long-term reliability, safety, and resale value. From underwater coatings to engine servicing, periodic upkeep helps prevent costly failures and ensures your boat is ready when you are. Drawing on expert advice from Maritimo’s senior marine engineer Ross Willaton, this guide outlines what to check during your annual haul-out — and what to keep an eye on year-round. With a few smart habits and some factory-backed knowledge, you’ll enjoy smoother cruising, better fuel efficiency, and peace of mind every time you leave the dock.

Bookmark post
Bookmarked
Bookmark post
Bookmarked

Time for the haul-out?

Every motor yacht owner knows: good maintenance means fewer headaches. But beyond peace of mind, a well-cared-for vessel performs better and commands more at resale.

Annual haul-outs aren’t just about applying a new coat of antifoul. They’re an opportunity to give your boat a complete physical. Maritimo’s senior marine engineer and world champion offshore racer Ross Willaton — known in the trade as Rossco — says these periods ashore are the best time to tackle essential works that can’t be done in the water.

Time for a haul out // Photo credit: Maritimo

“One of the largest and most visible items is the renewal of underwater coatings. Maritimos are delivered with Sigma Ecofleet antifoul and Propspeed on the running gear,” he explains. “The silicone topcoat on Propspeed is shiny and slick — it’s there to stop marine growth and reduce drag. But switching brands can mean stripping back to the epoxy coating or even bare metal, so compatibility matters.”

And if the work’s done at an authorised service centre—the Motor Yacht Service Centre in New Zealand, it’s handled responsibly.

“Having the work carried out at a certified facility means waste is treated on site and doesn’t re-enter the environment,” Rossco says.

- Advertisement, article continues below -
f your props or rudders are losing paint, or your anodes vanish in months, stray current may be at fault. This can be dangerous, both to your boat and to others nearby. // Photo credit: Maritimo

What to check during your annual service

While your boat’s hauled out, use the time wisely. Here’s what to tick off:

  • Running gear: Check shafts, skegs, rudders, screws, bearings, glands and trim tabs for wear and corrosion.
  • Coatings: Reapply Propspeed and antifoul — don’t mix incompatible systems without expert advice.
  • Through-hulls: Inspect all fittings, scoops, strainers and anodes. Clean and replace as needed.
  • Systems and hydraulics: Service engines, gensets, gyro stabilisers, davits and watermakers to the manufacturer’s schedule.
  • Trim tabs: Check they’re working through their full range. Saltwater ingress into the rams is a common issue. Store in UP position when not in use.
  • Hull and superstructure: Professional polishing helps protect gelcoat and keeps your boat looking sharp.

While cosmetic work can wait, ignoring mechanical or underwater issues can be a costly mistake. Problems caught early are easier to fix — and far less likely to ruin your next coastal adventure.

Stay ahead of corrosion and stray current

Excessive anode wear or underwater corrosion are red flags. If your props or rudders are losing paint, or your anodes vanish in months, stray current may be at fault. This can be dangerous, both to your boat and to others nearby.

Anything over 700 to 1000 millivolts on a silver chloride reference meter is a warning sign. And if your protective coatings are blistering or flaking, it’s time for a proper diagnostic.

Through routine inspections, you can avoid many of these issues before they become major problems. Ball valves and seacocks should be opened and closed regularly. Sea strainers need to be accessible and clean — a blocked strainer can overheat your engine fast.

- Advertisement, article continues below -

Preventative care between haul-outs

Don’t leave it all until the annual service. Regular minor maintenance makes major jobs easier and cheaper.

Keep your yacht shipshape with these habits:

  • Wash the exterior regularly, especially after saltwater use
  • Dive the hull between haul-outs to remove weed and growth
  • Clean vents and fans for engine and cooling intakes
  • Flush the watermaker with fresh water
  • Keep bilges clean and dry
  • Check all glands, seals, clamps and fuel lines for leaks or wear

Also keep an eye on performance. If you notice sluggish acceleration, increased fuel burn, or rough handling, investigate immediately. The culprit might be as simple as fouling or weight distribution — or something more serious like contaminated fuel.

If you notice sluggish acceleration, increased fuel burn, or rough handling, investigate immediately. The culprit might be as simple as fouling or weight distribution — or something more serious like contaminated fuel. // Photo credit: Maritimo

Use your manuals — and your service team

Every Maritimo is delivered with detailed Owner’s Manuals for all engineering, electrical and electronic systems. These documents are gold. Use them as your first port of call when issues arise — and share them with your marine technicians to streamline repairs.

Many New Zealand owners schedule a service stop on their way up north, Great Barrier Island, or the Coromandel. It’s about more than logistics — it’s about confidence.

- Advertisement, article continues below -

Peace of mind is priceless when you’re offshore, Maritimo point out. You want to know your systems are up to date and ready for anything.

Every Maritimo is delivered with detailed Owner’s Manuals for all engineering, electrical and electronic systems. // Photo credit: Maritimo

Ready when you are

Periodic servicing isn’t a chore — it’s an investment in reliability, safety and enjoyment. The more time you spend looking after your vessel, the more time you’ll spend using it.

Because nothing ruins a perfect day on the water faster than a preventable problem.

SHARE:

Article
Article

Fresh canvas, clear views: practical boat care for comfort afloat

Boat Maintenance
Brought to you by:
Keep your boat’s canvas, clears, and upholstery fresh with simple cleaning habits. Practical tips fo...
Article
Article

Prepare for summer: clean your anchor locker and stop pests hitching a ride

Anchoring & Mooring
Brought to you by:
A boatie’s pre-season guide to clean your anchor locker, choose the right hook, and keep sea pests o...
Article
Article

Managing your onboard power system

Boat Maintenance
Expert advice on managing power aboard your Riviera yacht, including battery care, inverter use, cha...

Comments

This conversation is moderated by Boating New Zealand. Subscribe to view comments and join the conversation. Choose your plan →

This conversation is moderated by Boating New Zealand.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Boating New Zealand
Boating New Zealandhttps://www.boatingnz.co.nz
Boating NZ is New Zealand’s premier marine title devoted to putting its readers behind the wheel of the latest trailerboats, yachts and launches to hit the market. It inspires with practical content and cruising adventures, leads the fleet with its racing coverage and is on the pulse of the latest maritime news and innovation.

Douglas B Foote Ltd (DBF)

For over six decades, Douglas B Foote Ltd (DBF) has been a trusted name in precision engineering, providing high-performance marine hydraulic solutions to boatbuilders, shipyards, and marine operators...

Voyager Trailers

Voyager Boat Trailers have been Manufactured in New Zealand for over 40 years, which means our trailers are built using experience and knowledge to achieve the best boat trailer design. We build Qual...

LATEST NEWS

2005 Palm Beach Motor Yachts PB 32 Sport Sea Eagle

One of only two of its kind ever made, Sea Eagle stands out from the crowd, presenting a unique opportunity for the discerning buyer.

2012 Alloy Cat NZ Kingfisher 900

Alloy Cats designed a great fishing catamaran in their Kingfisher 9m. Good layout with plenty of storage and sleeping for four.