Boating New Zealand Boat Reviews
Reviews
Boating New Zealand News
News
Boating New Zealand Sports
Sport
Boating New Zealand Lifestyle
Lifestyle
advertise
Boating New Zealand Boat Reviews
Reviews
Boating New Zealand News
News
Boating New Zealand Sports
Sport
Boating New Zealand Lifestyle
Lifestyle
BOAT-REVIEWS-MOBILE
Boat Reviews
BOAT-NEWS-MOBILE
News
BOAT-SPORTS-MOBILE
Sports
BOAT-LIFESTYLE-MOBILE
Lifestyle
HomeNew Zealand NewsConservation Legislation & PolicyNew environmental rules for recreational boats

New environmental rules for recreational boats

About
Share this

Tighter MARPOL regulations will also apply to recreational boat owners.

Bookmark post
Bookmarked

New Marine Protection Rules apply to recreational boat owners who use their boats in the sea. The key rules for recreational boats limit the emission of harmful sulphur oxides (SOx) from fuel use and nitrogen oxides (NOx) from engines. Both harm human health and the marine environment.

This pamphlet detailing the new Marine Protection Rules is available from Maritime New Zealand

The Part 199 Rules are based on the international convention MARPOL Annex VI, which seeks to reduce emissions from ships and boats around the world.

Engines

Engines installed after 1 January 2023

After 1 January 2023, if you install a new or used engine over 130kW (174.3hp) on your boat, it must come with the following documentation:

- Advertisement, article continues below -

For a compression-ignition (diesel) engine – an approved Technical File showing the engine’s NOx emissions are within the limits of the IMO Tier II standard.

For a spark-ignition (petrol) engine, a manufacturer’s declaration or certificate of conformity document showing the engine meets one of these regulations: O Directive 2013/53/EU of the European Parliament and of the Council on recreational craft and personal watercraft; Stage II or higher – O USA EPA Air Pollution Controls 40 CFR Part 1045 – Control of emissions from spark-ignition propulsion marine engines and vessels; Tier 2 or higher – O Australian Product Emissions Standards Rules 2017.

Engines installed before 1 January 2023

If your boat has an engine over 130kW (174.3hp) that was installed between 19 May 2005 and 1 January 2023, you can continue to use that engine until 2032, whether it has the above documentation or not.

After that, if you still have an engine without the required documentation it will need to be replaced by one that does. Note:

• If you have a compression-ignition engine installed between 19 May 2005 and 1 January 2011, the Technical File can show it meets the IMO Tier I standard instead of Tier II.

- Advertisement, article continues below -

• If your engine was installed before 19 May 2005 (or before 1 January 2011 if it is a spark-ignition engine) and it has not been significantly modified since then, you don’t need documentation for it and can keep using it until it needs replacing.

Talk to your engine supplier to ensure the engine you buy comes with the right documents.

An engine is ‘installed’ if the engine, fuel, cooling, or exhaust system is an integral part of the boat. For example, an outboard engine fuelled from a tank that is part of the structure of the boat would be ‘installed,’ while an outboard engine with a portable fuel tank would not be ‘installed.’

Fuel

Using petrol, diesel or gaseous fuel (CNG/LNG/LPG) is fine, and you won’t need to change anything. If your boat uses heavier fuel oils, talk to your fuel supplier to make sure the fuel is MARPOL Annex VI compliant.


For further information: https://www.maritimenz.govt.nz/airpollution or talk to your engine supplier to ensure the engine complies with the new rules.

Share this

Comments

This conversation is moderated by Boating New Zealand. Subscribe to view comments and join the conversation. Choose your plan →

This conversation is moderated by Boating New Zealand.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Chris Woodhams
Chris Woodhams
Adventurer. Explorer. Sailor. Web Editors of Boating NZ

Marsden Marine Services Ltd

Maritime New Zealand, Australasian Institute Marine SurveyorsCommercially Certified Marine Surveyor Qualified, Recognised, and Professionally Accredited Greg Marsden DipMarSvyAIMS-CCMS, MNZ P/ ...

Coltri Compressors

Italian design. Italian manufactured. With over 60 years experience of manufacturing high quality, high pressure breathing air systems to meet the demands of marine, diving and industrial applications. Coltri is a leading brand setting the industry benchmark worldwide.

LATEST NEWS